Natalie Wood – Death in 1981

by Posted in Publication Tagged , , , , ,

Actress Natalie Wood drowned on the weekend after Thanksgiving in 1981, found dead off the coast of Catalina Island in a small dinghy. She had been drinking with husband Robert Wagner, her Brainstorm co-star Christopher Walken and the yacht’s captain, Dennis Davern.

Natalie Wood

Officially, it was ruled an accidental drowning. But a lot of questions remained. Keep reading the article below to learn more about Natalie Wood Death.

Natalie Wood was a larger than life movie star that took Hollywood by storm and won three Oscar nominations in her lifetime. She was also a social activist and champion of mental health, decades ahead of her time. She also fought back against the Hollywood patriarchy and demanded equal pay for female actors. Yet for all of her many achievements, she died under mysterious circumstances in 1981.

Wood was a beautiful, talented actress with an even more beautiful offscreen life. She was an it-couple twice over with actor Robert Wagner and had a glamorous lifestyle that included luxurious vacations and high-profile romances. Her film career spanned decades and included a number of big screen classics, though her later years were more difficult.

On the night of her death, Wood was with her husband on their yacht called Splendor moored off Catalina Island. Guests on the boat that night included Wagner and actor Christopher Walken. Speculation has swirled ever since about what really happened to her.

One theory is that she was the victim of a brutal murder-suicide. Another is that she fell off the yacht. But both of those theories have a problem. The Los Angeles coroner changed the cause of death on her official report to accidental drowning. The change was based on new evidence. And that new evidence was some suspicious bruises on her body.

According to investigators, the bruises were consistent with the kind of marks that would be made if someone was knocked down and then dragged underwater. They were on her arms, neck, and chest. There were no defensive wounds on Wagner at all.

The bruises were also in the locations that would be expected if someone was fighting someone off. Several witnesses claim that they heard shouting from the water, but others say they didn’t hear anything. Besides that, no one on board the yacht heard anything either except for a woman from a nearby buy boat who has said over the years she had heard calls for help from 11:05 to 11:25 PM. And that is not a lot of time for someone to fall overboard and drown.

Theories

As one of the most iconic and acclaimed actresses of the 1950’s and 60’s, Natalie Wood starred in such classics as Miracle on 34th Street, West Side Story and Rebel Without a Cause. She was also a successful singer and a well-known model. She appeared in numerous TV shows and made over 30 movies. In addition to acting, she was involved in several political causes. She was a Democrat and was active in the Civil Rights Movement. She was also a feminist and an advocate for women’s issues.

On November 29, 1981, the actress was found dead in the Pacific Ocean off California’s Catalina Island. She was wearing a flannel nightgown, socks and a down jacket. It was initially reported that she had fallen overboard from her husband’s yacht, Splendour. Later it was determined that she had actually drowned.

Over the years, many theories have surfaced regarding Wood’s death. Some have focused on her personal and professional life while others have pointed the finger at her death as a murder mystery. While everyone at the time agreed that her death was tragic, the exact circumstances surrounding her death have always been disputed.

The author examines a number of the most popular theories of Natalie Wood’s death in detail. He consults with a forensic pharmacologist who addresses the possible role drugs might have played in her death. He also discusses the varying accounts of what happened on board the yacht, as reported by various witnesses, including boat captain Davern, and by tabloid reporters.

He reveals new information from the police investigation, which is currently closed, that raises serious questions about the original account of what happened. He also interviews Wood’s daughter, Natasha Gregson Wagner, to get her take on what really happened.

The book also explores the questionable behavior of the Los Angeles County Sheriff’s Department in the wake of Wood’s death. In particular, the author details Peter Pitchess’ cozy relationship with Frank Sinatra and other Hollywood “fixers” that might have impacted his handling of the case.

Reactions

Natalie Wood was an iconic Hollywood star, a doe-eyed well of emotion on screen and a shrewd businesswoman off. She was also an activist for the LGBTQ community and a doting mother to her three children. Her death in 1981 stunned the world, and her murder remains a mystery to this day.

The documentary focuses on the last days of Wood’s life and the effect it had on her loved ones. Co-produced by her daughter Natasha Gregson Wagner, it’s a tender and sensitive film that puts the focus on the actress’s legacy and all the ways she impacted those around her.

It also takes a look at the eerie coincidences that surround her death. It’s not a thriller by any means, but there are some genuinely unsettling details that are hard to ignore. For example, a fortuneteller had told Wood’s mother that her daughter would die in “dark water.” It’s a detail almost too ominous for a Hollywood script. Wood herself was notoriously afraid of the water and once said in an interview that she feared dark seawater more than anything else in the world.

She and her husband Robert Wagner often went on boating trips to Catalina Island, which was close to Los Angeles. The couple invited a number of friends to join them, but most of them declined. The only people who accepted were her Brainstorm costar Christopher Walken and Dennis Davern, the captain of their yacht.

In interviews, Wagner and Walken both retell the night of Wood’s death and give their own theories about what happened. While they don’t explicitly connect their theory to the cause of her death, it’s clear that they believe that something happened to her on deck before she disappeared in the water.

In a later interview, Wood’s sister Lana claims that Wagner was involved in her death and has been lying about it all these years. She’s convinced that he has something to hide and is angry at him for cutting her out of his life after her death. She believes that he is keeping the truth from the public and has been covering up for his murderer friend, the yacht’s skipper.

Conclusions

The death of Natalie Wood, an actress who was one of the most popular stars of Hollywood’s ’50s and ’60s, remains a mystery even to this day. The star, who appeared in such films as West Side Story and Rebel Without a Cause, drowned off the coast of Santa Catalina Island on November 29, 1981, while she and her husband, Robert Wagner, were aboard their yacht while filming a sci-fi movie called Brainstorm.

A new report by the Los Angeles County coroner’s office, however, suggests that Wood may have been assaulted before she died. The report states that bruising on her wrists, knees and ankles was more recent than originally thought, meaning it could have occurred after she went into the water, not while she tried to get back onto the boat as the original autopsy found.

The new bruising, combined with the fact that the original autopsy report stated she probably fell off the boat accidentally, led to the change in her cause of death from accidental drowning to undetermined causes of death. In 2013, she was reclassified as a suspicious death.

In the years since her death, many theories have been proposed about what happened to Natalie Wood. Some have argued that she was murdered, but most believe her death was simply an accident. Despite her beauty and talent, she was often plagued with personal problems, including substance abuse and depression. She also suffered from a number of failed marriages and had children with both her first and second husbands.

While some of the details of Wood’s death remain unclear, it seems clear that she was not happy in her marriage to Wagner and had been seeing other people. In her last interview, she talked about how her marriage had been difficult and said that she was looking forward to being with her children.

In addition, her yacht captain, Dennis Davern, has said in multiple interviews and in a book called Goodbye Natalie, Goodbye Splendour that he heard the couple fighting on the night of her death. He claims that Wagner told him and her co-star Christopher Walken to stick with the original story that she had slipped into the water by accident and didn’t call for help.

The Magic of Hardwood Floor Refinishing

by Posted in Hardwood Floor Tagged , , , ,

Hardwood Floor Refinishing NJ are the epitome of classic elegance, but even they need a little tender loving care now and then. Refinishing breathes new life into your hardwood, restoring its beauty and adding precious years to its lifespan.

Choose a water-based polyurethane finish. It dries more quickly, is environmentally friendly and emits less of an odor.

Hardwood Floor Refinishing

Preparation

Hardwood floors add to the overall value of a home, and they are an asset that can last a lifetime if properly maintained. One of the best ways to preserve hardwood is through refinishing. Refinishing is like a magic makeover for hardwood flooring, breathing new life into them and adding precious years to their lifespan. Refinishing can also fix minor issues such as gouges, dents and scratches. Major scratches and dents may require additional repairs or sanding, depending on the severity of the damage.

Choosing the right stain color is probably the most important step in refinishing your hardwood floors. Once you have selected a stain and applied it, the decision is permanent (unless you fork over more cash to have the floors restained). Before beginning the project, be sure that you are happy with the color. It’s a good idea to have a sample of the stain on hand for reference.

Before starting the refinishing process, remove all furniture from the room. It’s also a good idea to take down any curtains, pictures or register covers. Also, it’s a good idea to plan out where you’re going to stain so that you can get back into the room without walking across wet stain.

The next step in the refinishing process is to sand the floors. This can be a labor-intensive job that requires the proper tools and skills to do correctly. If you aren’t comfortable doing this yourself, hiring a professional is a good option.

It’s important to sand in a dustless manner. This will prevent the buildup of fine dust that can cause problems with the finish. Using a vacuum with a soft brush attachment or setting that’s designed to pick up fine particles is ideal.

Once the floors have been sanded, they should be thoroughly cleaned to remove any residual dirt and debris. This will help the final product look its best. Afterward, the floor can be stained with an oil or water-based polyurethane. Water-based polys are more durable than oil based ones, and they dry faster. It’s a good idea to allow the floors to cure for at least 48 hours before moving in furniture or placing area rugs.

Sanding

During the sanding phase of floor refinishing, the old finish is removed and any dents or scratches are smoothed out. This is an important step because it creates a blank canvas for the new stain. The sanding process can take two to four days, depending on the size of the room. This is one of the most labor-intensive parts of the refinishing process, but it’s necessary for a professional job.

Before starting, it’s essential to remove all furniture from the rooms being sanded. Covering up fixtures and appliances with plastic tarps is also helpful to prevent damage. You should tape up outlets, cracks under doors and other areas where sawdust may enter. It’s a good idea to wear a dust mask and gloves during the sanding process.

When sanding, make sure to use the correct disks for your machine. The grit size should be matched to the type of wood. For instance, 80-grit disks are best for pine floors, while 100-grit is ideal for oak. Moreover, you should always keep the sander moving. Stalling or standing still will leave noticeable swales on the floor. It’s also a good idea to change the sanding paper often. It will make the process quicker and more efficient.

After sanding, the floor should be wiped down and vacuumed thoroughly to eliminate any remaining sawdust. Once the floors are completely dry, you can begin reinstalling baseboards and rugs. You should also reattach any door and window casings. It’s a good idea to wait two weeks to reenter your home after the floors have been refinished.

Then, the floors can be stained with your choice of color. Be sure to test the stain on a small area of the floor before applying it to the entire surface. Also, different types of wood react differently to stains.

Lastly, you should apply a polyurethane topcoat to protect the hardwood floor. It’s best to choose a water-based polyurethane, as oil-based ones can lead to discoloration on some woods. This is a great way to prolong the life of your hardwood floors and improve your home’s value.

Filling

Hardwood floors add a warm, classic elegance to a home that’s difficult to match. But just like anything else, hardwood floors need a little love and care to keep them looking their best. That’s where refinishing comes in – a magical makeover that restores the look of your floors, adding to their longevity.

Refinishing involves much more than just sanding the floor to get rid of scratches, dents and gouges. The refinishing process includes addressing any water damage that may have occurred to the wood, replacing warped or swollen boards and ensuring the wood is thoroughly dry. This ensures that the new topcoat will adhere properly and extend the life of your hardwood floors.

One of the most common problems with hardwood floors is gaps. These are caused by wood expanding and contracting – especially when the weather is hot or humid. Gaps are often not a problem if they don’t get too large, but you might want to fill them in if items are easily lost between the planks or you notice that the gap is becoming wider over time.

There are several ways to fill gaps in a hardwood floor, including using a wood or rope filler. Wood and rope fillers can be mixed to a putty consistency and introduced into the gaps using a spatula. This method offers a very sturdy end result, and can be stained to match the finish of the floor. However, it can become brittle over time, and is not recommended for gaps that are exposed to significant floor movement.

If you’re going to use a wood or rope filler, it’s important that it be moisture-resistant, so the filler can expand and contract with the floor without being forced out of the gap. You’ll also need to apply a coat of stain over the filler to help it blend in with the rest of the floor.

Alternatively, you can fill gaps in a wooden floor by using a powdered wood filler that’s mixed to a paste-like consistency. This is a fast and inexpensive option, but can be prone to shrinking and cracking over time. If you choose to use this method, it’s a good idea to use a waterproof stain that will protect the filler from moisture and prevent it from causing additional damage to your floors.

Finishing

There’s nothing like a beautiful hardwood floor to add warmth and elegance to a home. But over time, stains and scratches can diminish their appeal. Fortunately, it is possible to rejuvenate these floors by refinishing them. However, the process is time-consuming and requires a certain amount of know-how.

The first step in refinishing is to closely examine your floors to determine if they are even candidates for refinishing. If they have an extremely thin top layer, it may not be possible to sand them down enough to get rid of the blemishes. In this case, the best option may be to re-coat the floors rather than refinish them.

Before starting the refinishing process, it’s important to thoroughly clean your floors to remove any dust and debris from the surface. This can be done by vacuuming or mopping the floors. In addition, it’s a good idea to close the windows and doors in the room you’re working on to contain the dust.

Once your floors are clean, you’ll need to sand them down to create the proper bond for the new finish. To sand the floors, use a drum or orbital sander and start with coarse-grit sandpaper, then move on to finer grits until you’ve achieved the desired level of smoothness. It is essential that you don’t over sand the floors because you can damage them.

When the sanding process is complete, it’s important to thoroughly vacuum and wipe down the floors to remove any remaining dust. This will help to prevent any snags or imperfections in the final result. After the floors are dry, they can be re-coated with polyurethane. It’s generally recommended to apply at least two coats of polyurethane, but some experts believe that three coats are preferable.

It’s also a good idea to tape masking paper around the doorways to prevent dust from blowing into other areas of the home. Finally, it’s essential to wait for the floors to dry completely before moving back in. It can take four to seven days for the floors to fully cure.